Obd2 scanner utilizing wire fasteners.10Start the engine and check for any leaks within the program

The way to Hook Up a Boost Gauge 1Open the hood of one's vehicle and locate the intake manifold. The intake manifold may be the connecting bracket from the air filter towards the engine.2Find a flat surface on the intake manifold and drill a 21/64-inch diameter hole by means of the intake manifold having a energy drill.

3Tap the hole for threads by screwing the 1/8-inch NPT tap tool into the hole .4Screw the barb fitting into the hole inside the intake manifold. Tighten it using a wrench.5Install the enhance gauge into a gauge pod, which may be purchased with your gauge.6Mount the gauge pod in the automobile making use of a screwdriver .

7Route the increase pressure line from the gauge by means of the firewall, towards the intake manifold.8Connect the fitting on the boost pressure line to the barb fitting inside the intake manifold. Tighten it having a wrench.9Fasten the wire away from moving parts, utilizing wire fasteners.10Start the engine and check for any leaks within the program.