diagnostic car tool PCM&quot

How you can Reset the Computer system on a 2001 Ford F-150 1Locate the OBD port in your Ford F-150 to the left of your fuse panel cover in the driver side foot nicely.2Plug the OBD plug from the OBD scan tool in to the OBD port subsequent towards the fuse panel.3Turn the ignition key towards the "II" /a>; position and wait for the tool to retrieve the codes.

Once the tool has retrieved the codes, wait for the tool the clear the codes. When the codes are clear, your check engine light will go out. At this point, the personal computer will be reset. How you can Reset the Computer system on a 2002 Chevy Malibu 1Place the Malibu's gear selector inside the "P" position and turn off the engine. Set the parking brake and turn the ignition forward to the "ON" position, but don't begin the engine .2Plug the scan tool's data cable in to the Malibu's diagnostic information port.

This port is situated underneath the dashboard, just below the steering wheel.3Turn on the scan tool and adhere to the on-screen actions to enter the vehicle's certain powertrain facts.4Select "PCM" from the scan tool's principal menu. Select "codes," then pick "clear all existing and stored DTCs." DTC is an abbreviation for diagnostic trouble code.5Wait a moment for the scan tool's display to indicate that each of the codes happen to be cleared. Unplug the scan tool and start off the engine. Confirm that the SES light is just not illuminated. The computer is now reset.