Obd2 scanner Get rid of the 3 bolts that attach the HCU bracket towards the automobile frame

How to Install F150 Electric Brake Controls Directions 1. Take away the negative cable from the battery using a socket wrench to make sure the engine does not get started during the procedure. Disconnect the air cleaner assembly. two. Disconnect the four fittings that connect the brake lines to the HCU with a socket wrench, and detach the brake lines from the HCU.

Get rid of the 3 bolts that attach the HCU bracket towards the automobile frame, and disconnect the HCU bracket. 3. Get rid of the two nuts that attach the HCU to its bracket having a socket wrench, and disconnect the HCU from its bracket. Detach the ABS module from the HCU. four . Attach the ABS module to the new HCU.

Install the HCU to its bracket, and tighten its retaining nuts to 80 inch-pounds with a torque wrench. Connect the HCU bracket towards the vehicle frame, and tighten the mounting bolts to 18 foot-pounds /a>. Attach the brake lines for the HCU, and tighten the fittings to 13 foot-pounds. five. Connect diagnostic tool Globally Diagnostic Program 418-F224 towards the vehicle's data hyperlink connector. Bleed the ABS, and use the diagnostic tool to clear any ABS faults. A qualified mechanic usually performs this step.